The continuous slitting machine is an improved product based on Nishimura, Japan.
The continuous slitting machine adopts blade-type knives, cutting without burrs, and adopts a cantilever structure knife holder, which is convenient for combination and change of knives. 

1) Power requirements: 380V/three-phase/50Hz, power: 4KW

2) Compressed air: pressure: 0.6 MPa, flow: 0.04 M3/min;
3) Cutting material: 9-30μm copper foil or aluminum foil, with electrode material coated on both sides, after drying and rolling, the thickness of the battery pole piece is 50~300μm;
4) Unwinding method: single-axis passive unwinding, automatic correction, constant tension control;
5) Maximum unwinding width: 660mm;
Unwinding diameter: the maximum is not less than 500mm;
6) Width of guide roller: ≥750mm;
7) Transmission speed: Mechanical speed: 50m/min, continuously adjustable.
8) Slitting accuracy: ±0.1mm;
9) Material rewinding: upper and lower double shaft rewinding, rewinding diameter: maximum not less than Φ500mm;
10) Total weight of equipment: about 2T,
Ground load-bearing requirements for equipment installation:> 1.5T/m2, and a pad (provided by the supplier) should be placed at the bottom of the equipment.
11) Equipment size: Approximately 2050mm in length×1800mm in width×1600mm in height.