1. Dimensions: length 1150mm X width 650mm X height 1800mm;
2. The weight of the whole machine: 800kg;
3. The ratio of total weight to load-bearing area: ≤1500kg/m²;
4. It is supported by rollers + feet, which is convenient to move and fix;
5. Control electrical box size (length X width X height): ≤ length 500mmX width
250mmX height 630mm;
Equipment production capacity:
★ Design volume: 14L; effective use volume: 10L;
★ Qualified rate of equipment produced by the equipment: ≥98%;
★ Mean time between failures of equipment MTBF: ≥3000H (excluding poor
incoming materials and influencing factors such as plant power supply and gas
supply);
Specification of mixing tank:
★ Inner diameter Φ300mm, depth 200mm;
★ Using SUS304 material, precision turning, precision grinding, double-layer
stainless steel water solvent;
Revolution:
★ Two sets of twist frame type mixing paddles, SUS304 material, integral casting
molding, precision machining;
★ Main stirring: planet carrier speed: 0~50rpm; stirring paddle speed: 0~100rpm;
★ Frequency conversion speed regulation, forward and reverse design;
★ Power of revolution motor: 1.5kW;
Rotation:
★ A set of dispersing shafts: each shaft is equipped with two 60mm diameter;
SUS304 material;
★ Dispersion speed: 0~5320rpm;
★ Cutting speed: Vmax=23m/s;
★ Rotating motor power: 2.2kW;
The ultimate vacuum can reach -0.098Mpa, automatic control (matching rotary
vane vacuum pump model: 2ZX-2):
★ (Test method: vacuum≤-0.090Mpa, close the vacuum, after 4 hours≤
-0.080Mpa);
Temperature control: Pt100 temperature sensor directly contacts the material, the
measurement is more accurate, and the reaction speed is faster;
★ 1 imported cooling water pneumatic ball valve, temperature range 0-80℃, temperature difference ±1℃, response time 1℃/5s;
★ The temperature measurement point is located in the barrel, and the temperature
measurement point moves with the revolution in the material 1/3 away from the
bottom of the material tank;
Equipment manufacturing and assembly accuracy:
★ The gap between the stirring paddle and the container wall: 3.0±1.0mm;
★ The gap between the stirring paddle and the bottom of the container: 3.0±
1.0mm;
★ The gap between the stirring paddle and the stirring paddle: 3.0±1.0mm;
Lifting stroke: 250mm; lifting method: lifting screw lifting, barrel lifting; lifting
motor power: 0.55kW;
Control system:
★ The operation panel adopts button control;
★ The revolution and rotation motors are respectively controlled by the inverter;
★ The electric box adopts a closed structure, and the electric box body adopts
compressed air cooling method;
★ Forward and reverse design, slow mixing design;
Safety protection:
1. There is an alarm when the container drops and rises;
2. The plugging and unplugging of the thermometer is interlocked with the movement
of the tank;
3. The stirring shaft can rotate only after the container is raised in place;
4. When the stirring shaft rotates, the container cannot be lowered;
5. When the motor current exceeds the range, it will automatically stop;
6. Grounding of mixer and control cabinet;
7. Automatic protection of electrical appliances; emergency stop protection for
operators;
8. Two explosion-proof limit switches to prevent the machine from working when the
mixing container is removed;
Overall technical parameters of the equipment:
1. Total power: 4.5kW;
2. Ultimate vacuum: ≤-0.098MPa;
3. The positive pressure of the water-cooled jacket of the mixing tank: ≤0.3MPa;
4. 1000 measurement away from the operating position or the outer wall of the
equipment, equipment noise: ≤80FB